Magneto-dynamic tool for full arch immediate loading in post-traumatic restoration with narrow implants: A case report.

New surgical techniques using narrow, tilted implants positioned through a magneto-dynamic tool in guided surgery for a Toronto restoration. A 69-year-old woman wanted fixed rehabilitation to replace her removable complete dentures. A cone-beam computed tomography showed significant bone resorption in both the maxillary and mandibular regions. The plan was to load the entire upper arch with six implants immediately, while removable partial dentures were recommended for the lower jaw. The guided surgery project was aligned with the new dentures, and the laboratory created a printed cast with dental implant analogues in planned positions. A metal-reinforced denture was constructed, and surgery was performed to place six narrow implants using the magneto-dynamic instrument. The denture was directly screwed onto multi-unit abutments. Final rehabilitation was completed after 6 months. Narrow implants can be a good option for fixed, full-arch rehabilitations. Further research is needed to confirm these findings on a larger scale.

Digital Protocol to Record Occlusal Analysis in Prosthodontics: A Pilot Study.

Background: Digital technologies enable the accurate replication of occlusion, which is pivotal for stability in maximum intercuspation and dynamic occlusion. CAD softwares generates standardized occlusal morphologies requiring significant adjustments. The consideration of individual mandibular movements during restoration leads to better functional integration. This pilot study evaluates the efficacy of a novel, fully digital protocol for occlusal analysis recording in prosthodontics. Methods: Patients needing single or multiple metal-free restorations were included. Teeth underwent horizontal finish line preparation, while restorations on implants were either directly screwed or used multi-unit abutments. A digital impression (Trios 3 Intraoral Scanner) captured the mouth's elements. Dynamic occlusion was recorded via Patient Specific Motion (PSM). After the placement and functionalization of temporary restorations, subsequent scans included various elements, and CAD software (Dental system) was used for the restoration design. Restorations were milled in monolithic zirconia, pressed from CAD/CAM-milled wax, and sintered. Results: An evaluation of 52 restorations in 37 patients indicated high accuracy in restorations manufactured via the fully digital workflow. Monolithic zirconia was predominantly used. Subtractive (17.3%) and additive (7.7%) occlusal adjustments were mainly chairside. Conclusion: This study underscores the efficacy of meticulous verification measures and a centric contact system in reducing the need for clinical occlusal refinements in prosthetic restorations.

Photographic analysis of orofacial soft tissue alterations related to rapid maxillary expansion in pediatric patients.

Maxillary transverse deficiency is widely recognized as one of the most common skeletal issues in orthodontics, and rapid maxillary expansion (RME) is commonly employed as a treatment method. This study aimed to investigate the impact of RME on the soft tissues of the orofacial region in pediatric patients. The study included two groups: an experimental group comprising 30 patients (16 females and 14 males) with maxillary skeletal transverse deficiency who required rapid maxillary expansion (RME), and a control group consisting of patients (10 females and 10 males) who did not require RME or orthodontic treatment. Frontal and profile photographs were taken before and after RME for both groups. Frontal photographs were used to obtain 12 linear measurements, while profile photographs were used to perform 2 linear and 2 angular measurements using the "protractor" and "pixel ruler" software. Burstone-Legan, Steiner and Rickett's analyses were performed to determine the locations of the upper and lower lips. Student t-test, paired samples t-test and Mann-Whitney U test were used to evaluate the data. In the experimental group, there was a statistically significant increase in nose width and intercommissural distance at the end of the treatment (p < 0.05). Similarly, both the experimental and control groups showed a statistically significant increase in the dorsum of nose length at T2 compared to the initial measurement (p < 0.05). Furthermore, the male participants in the experimental group exhibited a statistically significantly higher increase in nose length and dorsum of the nose during the T1 and T2 periods compared to the female participants in the experimental group (p < 0.05). RME may lead to changes in soft tissues in pediatric patients and was observed to be gender-specific. However, these changes were not clinically noticeable, and long-term follow-up studies are needed to determine the long-term effects of these changes.

Impact of clear aligner therapy on masticatory musculature and stomatognathic system: a systematic review conducted according to PRISMA guidelines and the Cochrane handbook for systematic reviews of interventions.

BACKGROUND: Clear aligner therapy has gained popularity as a minimally invasive orthodontic treatment option. However, its impact on the masticatory musculature and the stomatognathic system is an area of growing interest, as it involves the adjustment of occlusion and tooth movement. This systematic review aims to comprehensively assess and synthesise existing evidence regarding the influence of clear aligner therapy on the masticatory musculature and the stomatognathic system. METHODS: An exhaustive search was performed on electronic databases that adhered to PRISMA guidelines. Clinical studies that evaluated the impact of patients receiving aligner orthodontic treatment on the muscles of the mastication and stomatognathic systems were included. A standardised data extraction form was devised for relevant variables. Two reviewers extracted the data variables. ROB-2 was used for bias evaluation in the selected studies. RESULTS: A total of six studies met the inclusion criteria. The wearing of clear aligners significantly impacted the muscles of mastication. Muscle activity and discomfort showed a significant alteration in the initial days of appliance placement. but this observation was temporary, with no significant changes thereafter in subsequent follow-up. Bite force reduction was also noted. All the studies evaluated showed good methodological quality. CONCLUSION: The review found that aligned orthodontic treatment may have a variable impact on muscles of mastication, with a potential for initial exacerbation of symptoms followed by possible improvement. However, due to the limited number of studies and their heterogeneous nature, further robust research is recommended to fully understand the relationship between aligned orthodontic treatment and masticatory muscles.

Light gradient boosting-based prediction of quality of life among oral cancer-treated patients.

BACKGROUND AND INTRODUCTION: Statisticians rank oral and lip cancer sixth in global mortality at 10.2%. Mouth opening and swallowing are challenging. Hence, most oral cancer patients only report later stages. They worry about surviving cancer and receiving therapy. Oral cancer severely affects QOL. QOL is affected by risk factors, disease site, and treatment. Using oral cancer patient questionnaires, we use light gradient Boost Tree classifiers to predict life quality. METHODS: DIAS records were used for 111 oral cancer patients. The European Organisation for Research and Treatment of Cancer's QLQ-C30 and QLQ-HN43 were used to document the findings. Anyone could enroll, regardless of gender or age. The IHEC/SDC/PhD/OPATH-1954/19/TH-001 Institutional Ethical Clearance Committee approved this work. After informed consent, patients received the EORTC QLQ-C30 and QLQ-HN43 questionnaires. Surveys were in Tamil and English. Overall, QOL ratings covered several domains. We obtained patient demographics, case history, and therapy information from our DIAS (Dental Information Archival Software). Enrolled patients were monitored for at least a year. After one year, the EORTC questionnaire was retaken, and scores were recorded. This prospective analytical exploratory study at Saveetha Dental College, Chennai, India, examined QOL at diagnosis and at least 12 months after primary therapy in patients with histopathologically diagnosed oral malignancies. We measured oral cancer patients' quality of life using data preprocessing, feature selection, and model construction. A confusion matrix was created using light gradient boosting to measure accuracy. RESULTS: Light gradient boosting predicted cancer patients' quality of life with 96% accuracy and 0.20 log loss. CONCLUSION: Oral surgeons and oncologists can improve planning and therapy with this prediction model.

Prediction of interactomic hub genes in PBMC cells in type 2 diabetes mellitus, dyslipidemia, and periodontitis.

BACKGROUND AND OBJECTIVE: In recent years, the complex interplay between systemic health and oral well-being has emerged as a focal point for researchers and healthcare practitioners. Among the several important connections, the convergence of Type 2 Diabetes Mellitus (T2DM), dyslipidemia, chronic periodontitis, and peripheral blood mononuclear cells (PBMCs) is a remarkable example. These components collectively contribute to a network of interactions that extends beyond their domains, underscoring the intricate nature of human health. In the current study, bioinformatics analysis was utilized to predict the interactomic hub genes involved in type 2 diabetes mellitus (T2DM), dyslipidemia, and periodontitis and their relationships to peripheral blood mononuclear cells (PBMC) by machine learning algorithms. MATERIALS AND METHODS: Gene Expression Omnibus datasets were utilized to identify the genes linked to type 2 diabetes mellitus(T2DM), dyslipidemia, and Periodontitis (GSE156993).Gene Ontology (G.O.) Enrichr, Genemania, and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were used for analysis for identification and functionalities of hub genes. The expression of hub D.E.G.s was confirmed, and an orange machine learning tool was used to predict the hub genes. RESULT: The decision tree, AdaBoost, and Random Forest had an A.U.C. of 0.982, 1.000, and 0.991 in the R.O.C. curve. The AdaBoost model showed an accuracy of (1.000). The findings imply that the AdaBoost model showed a good predictive value and may support the clinical evaluation and assist in accurately detecting periodontitis associated with T2DM and dyslipidemia. Moreover, the genes with p-value < 0.05 and A.U.C.>0.90, which showed excellent predictive value, were thus considered hub genes. CONCLUSION: The hub genes and the D.E.G.s identified in the present study contribute immensely to the fundamentals of the molecular mechanisms occurring in the PBMC associated with the progression of periodontitis in the presence of T2DM and dyslipidemia. They may be considered potential biomarkers and offer novel therapeutic strategies for chronic inflammatory diseases.

A biomechanical reinforcement of PMMA denture base material with sericin and fibroin: A preliminary screening study.

BACKGROUND: Polymethyl methacrylate (PMMA) is a commonly used denture base material, but susceptibility to fracture under functional loading remains a challenge. OBJECTIVE: This preliminary screening study aims to investigate the potential of sericin and fibroin as reinforcing agents in the PMMA denture base material. METHODS: The flexural and impact strengths of PMMA incorporated with 0.01% sericin, and 0.01% each of sericin and fibroin, were evaluated. The control group consisted of PMMA without any additives. The maximum load and energy required to break the samples were measured. Statistical analysis was performed using one-way ANOVA test and Scheffe Post Hoc tests to compare mean values between subgroups. RESULTS: The results indicated significant improvement in the flexural and impact strengths of PMMA with the addition of sericin and fibroin. The subgroups with 0.01% sericin, and 0.01% each of sericin and fibroin, demonstrated higher mean values in load and energy measurements compared to the control group. The statistical analysis confirmed the significance of these findings. CONCLUSION: The addition of 0.01% sericin and 0.01% each of sericin and fibroin to PMMA denture-based resin material significantly increases its flexural and impact strengths. These preliminary findings suggest the potential of sericin and fibroin as effective reinforcing agents in PMMA denture base materials, thereby enhancing their biomechanical properties.

Periapical healing outcome following non-surgical endodontic intervention among diabetic patients: A systematic review conducted according to PRISMA guidelines and the Cochrane handbook for systematic reviews of interventions.

Background: Periapical diseases are common dental conditions that require non-surgical endodontic intervention (NEI) for successful treatment. However, the impact of diabetes mellitus (DM) on the periapical healing (PH) outcome in diabetic patients remains somewhat unclear. This review aimed to evaluate the PH outcome following endodontic intervention among DM-afflicted individuals. Methods: A comprehensive search was conducted across multiple electronic databases to identify relevant studies. Specifically, a set of selection criteria was applied to select studies that assessed PH outcomes in individuals with DM who underwent different treatment protocols. Data extraction and quality assessment were performed following predetermined protocols. The risk of bias (RoB) 2 assessment tool evaluated the quality of the included studies. Results: A total of 11 studies met the inclusion criteria and were included in the investigation. Four studies showed a higher incidence of apical periodontitis in diabetic individuals compared to controls, and five studies reported reduced healing and success rates in this group. Overall, nine studies have shown that DM has a negative impact on periapical outcomes. This suggests that DM is an important factor in the prognosis of endodontic intervention. The assessment tools used were PAI, PR, SC, and FD analysis. RoB-2 assessed the included studies as having a moderate RoB. Conclusion: This review provides compelling evidence that DM patients experienced a noticeable negative impact on PH outcomes compared to the control population. These findings highlight the importance of considering the diabetic status of patients when assessing the prognosis of periapical diseases and planning interventions for NEI. Further research is needed to validate these results and explore potential mechanisms underlying the observed associations.

Indirect orthodontic bonding using an original 3D method compared with conventional technique: A narrative review.

As well known success in orthodontics is related to a correct diagnosis and to a carefull treatment planning. Our study aims to provide clinician with a reproducible and precise method, for orthodontic indirect bonding, thanks to CBCT images and due to a CAD-CAM process. METHODS: A case of an orthodontic treatment plan, of a female patient, 37 years old, was selected. Plaster models were digitally acquired using the Extra-Oral scanner Maestro 3D and processed within the Studio Maestro 3D software. CBCT images in DICOM format were imported into the MIMICS software, in order to perform the segmentation of the dental elements, and to obtain a three-dimensional coronal-root dental arches model. The DICOM file thus processed was exported in an STL file, reworked with Meshmixer software to improve image quality, and imported into the 3D Maestro software to be superimposed on the digital model. In this way a three-dimensional real model of the dental arches was developed. After an accurate orthodontic virtual set-up, we proceeded to brackets positioning on the 3D model of the dental arches. Subsequently, a virtual transfer template was created, in order to carry out the digital printing of a thermo-printed mask necessary to perform an indirect bonding of the orthodontic appliance. RESULTS: The original digital workflow proposed in this study allows the development of a real and non-ideal three-dimensional coronal-root model of the dental arches; this model can be used for indirect orthodontic bonding eliminating any errors in the expression of 1st, 2nd and 3rd order information of the pre-informed orthodontic appliance. CONCLUSIONS: Technological advancements in oral scanning and 3D printing will allow the achievement of an easy and reproducible ideal positioning of the orthodontic brackets.

Stereomicroscopic evaluation of sealing ability of four different root canal sealers: an in-vitro study.

AIM: To compare and evaluate the sealing ability of four different commercially available sealers to provide seal against the dye penetration test using a stereomicroscope-an in-vitro study. MATERIAL/METHOD: 80 extracted single rooted mandibular premolar with single canal were used in this study. The samples were divided in 4 groups (20 in each) based on sealer. Group I (Diaproseal), Group II (apexit Plus), Group III (MTA Fillapex) and Group IV (Bio-C). The samples were analyzed using a stereomicroscope and data analysis was done with one-way Anova And post hoc Tukey's test. RESULT: The mean dye penetration score was 1.2400 ± 0.778 mm for Group I. 2.6000 ± 0.897 mm for Group II, 4.2000 ± 0.923 mm for Group III and 4.225 ± 2.055 mm for Group IV. One-way Anova analysis shows that intergroup comparison was statistically significant between the four groups. The post hoc Tukey's test reveals that the difference was statistically non-significant between group III and group IV. CONCLUSION: It was concluded that between the four groups the Group I (Diaproseal) showed the least dye penetration followed by Group II (Apexit Pus), Group III (MTA Fillapex) and then Group IV (Bio-C), where there was no significant difference between the Group III (MTA Fillapex) and Group IV (Bio-C).

Pharmacological therapy in the management of temporomandibular disorders and orofacial pain: a systematic review and meta-analysis.

BACKGROUND: Temporomandibular disorders (TMD) are manifested by soreness in the jaw joint area and jaw muscles, clicks or creaks when opening or closing the mouth. All these symptoms can be disabling and occur during chewing and when the patient yawns or speaks. Several classes of drugs are used to treat symptoms. This review aims to assess which drug suits the different signs. METHODS: Pubmed, Web of Science and Lilacs were systematically searched until 01/02/2023. Clinical trials were selected that dealt with drugs used in temporomandibular dysfunction RESULTS: Out of 830 papers, eight studies were included. The Meta-Analysis with Continuous Outcomes with Pre-Calculated Effect Sizes resulted in the rejection that there is intergroup variability (p.0.74). CONCLUSIONS: Treatment of orofacial pain is still a significant challenge for dentistry. We can conclude that there is no drug of first choice in the treatment of temporomandibular pain. However, the clinician must distinguish the type of pain and the aetioloic cause of the pain so that the patient can be treated and managed pharmacologically.

Dental problems in children with autism: a 5-year study.

Caries experience of children and complex clinical circumstances are an actual challenge for any healthcare professional. To investigate the early childhood caries (ECC) in autistic and non autistic children (≤4 years of age) evaluating the amount of dental damage and the treatments carried out in both groups. Data regarding the oral health status of 40 patients (≤4 years of age) were assembled. The sample group was constituted of 20 autistic children (12 males with a mean age of 2.5 years and 8 females with a mean age of 3.2 years) whereas 20 patients without the autistic spectrum represented the control group (11 males with a mean age of 3 and 9 females with a mean age of 3.3 years). There were no significant differences between the two groups as regards both the extent of dental damage and the treatments carried out. About the frequency, in the autistic group, the most frequent caries were the white spots and enamel proximal lesions (2.2%), followed by only white spots (1.2%) and brown-black cavities and root stumps (0.6%). In the control group, the brown-black cavities and root stumps represented the most frequent findings (2.2%), followed by white spots and enamel proximal lesions (1.4%) and white spots (0.4%). Regarding the treatments, the most repeated management of dental damage among autistic patients was composite restorations (2.2%) while in nonautistic patients were tooth extractions (2%).

Mini Crestal Sinus Lift With Bone Grafting and Simultaneous Insertion of Implants in Severe Maxillary Conditions as an Alternative to Lateral Sinus Lift: Multicase Study Report of Different Techniques.

The present study evaluates the efficacy and clinical outcomes of crestal sinus lift techniques used to elevate the sinus floor simultaneously with bone grafting and implant placement as a possible and reproducible alternative to lateral sinus lift. Patients underwent different crestal sinus elevation techniques. The heterologous biomaterial was used as graft material, and multiple implants were placed simultaneously after sinus augmentation. Radiographic and clinical examinations were performed during follow-up. All procedures were successfully performed without any apparent perforation of the Schneider membrane. The sinus floor was augmented with an average height of 5 mm (range: 2.8-7.4 mm). The implants healed smoothly with healing screws. Peri-implant marginal bone was stable with a mean follow-up of 50 months (range: 33-71 mo). No complications were observed during the follow-up. Based on the limited data collected in this study, the new crestal sinus elevation approach can effectively raise the sinus floor and reduce the incidence of postoperative complications. Other cases with long-term follow-up are needed to confirm and improve this crestal sinus lift technique.

Cigarette smoke and tobacco heating aerosol on the aging of clear aligners.

BACKGROUND: The treatments with clear aligners (CA) showed an exponential higher percentage in the last years being almost invisible with major patient acceptability and a resulting improvement in quality of life. CA are composed of thermoplastic polyurethane not inert but subjected to changes due to heating and humidity, chewing forces, and prolonged exposure to enzymes in saliva in the oral cavity and external factors. Cigarette smoke (CS) and the aerosol produced by tobacco products with reduced health risks may be considered among the external factors affecting CA. The purpose of this study was the assessment of optical properties (absorbance and transmittance) and roughness of CA after in vitro aging due to exposition to CS and THS2.2, compared to controls. The secondary objective will be the investigation of CS and THS2.2 effects on resin composite inside aligners used for attachments during treatment with CA. METHODS: A total number of 60 CA units will be used and equally divided in three different groups (20 in each): CS group exposed to reference cigarettes smoking, THS2.2 group exposed to aerosol from 20 heat-not-burn sticks, and control group, CG to pure air only. The aligners will present ten introflection for the attachments on the anterior part. In accordance with ISO standard 3402, 3R4F cigarettes and THS2.2 tobacco sticks must undergo conditioning for a minimum of 48 hours and a maximum of 21 days at a temperature of 22±1 °C and a relative humidity of 60±3%. RESULTS: Using spectrophotometry, the optical characteristics (absorbance and transmittance) of each aligner will be evaluated after aging (Jasco UV-vis V630PC, Tokyo, Japan). Each aligner will be cut with a rotating saw from canine to canine prior to the measurements in order to lop off the lingual region and displaying the labial barrier. The absorbance and transmittance measurements will be collected and statistically analyzed with a significance of P<0.05. CONCLUSIONS: Surface roughness of the aligners and attachments inside them will be assessed by 3D scanning microscopy (Infinite Focus G4h). Color of resin composite will be assessed using the (CIE Lab) Commission Internationale de l'Eclairage L*a*b* color space by means of Olympus CrystalEyef dental spectrophotometer. Clinicians should advise patients to refrain from smoking and drinking coffee or tea while wearing aligners for two reasons: first, the color change is unacceptably noticeable when wearing aligners, and second, the material's chemical composition may be slightly altered, which could affect the intended dental movements.

The role of anxiety in patients with hereditary angioedema during oral treatment: a narrative review.

Objective: The present study investigated the clinical potential of managing anxiety during dental procedures to reduce acute attacks in patients with hereditary angioedema (HAE). HAE is a rare disease, little known to physicians and dentists, but with an increased hospitalization rate over the years. HAE is due to a deficiency/dysfunction of the C1 esterase inhibitor, leading to increased vascular permeability. Recommendations for HAE management include long-term and short-term prophylaxis and treatment of acute attacks, but the importance of anxiety control is underestimated. Materials and methods: The authors reviewed the literature to provide the scientific community with an overview of possible protocols for managing anxiety in dental practice and their effectiveness. Management can be used in prosthetics, periodontal and implant surgery, endodontics, and oral surgery. Discussions: Our analysis shows that although there are few articles in the indexed literature, protocols for managing anxiety in HAE patients in dentistry will become increasingly prevalent in the daily clinical practice of dentists due to its benefits. Conclusions: The benefits and better control of intraoperative complications and risks may lead clinicians to use sedation, assessment, or anxiety control techniques in daily clinical practice to reduce such attacks. Clinical relevance: This study suggests that controlling and managing anxiety can help prevent and reduce acute angioedema attacks.

Assessment of fully digitalized workflow for implant-prosthetic rehabilitation in temporomandibular disorders patients: A clinical study.

Digitalized workflow eliminates the need for the tray, impression materials, its decontamination, packaging and shipping, pouring with plaster, cast fabrication, mounting in an articulator, reducing storage spaces, and the risks of any loss or fracture of the plaster model is overcome by archiving on the computer. This clinical investigation aimed to evaluate the effectiveness of the fully digitalized rehabilitation [implant-supported prosthesis] method in partially edentulous patients and with TMD, using advanced software. Twelve patients requiring implant-supported prosthesis in the mandibular molar area with Temporomandibular disorders [TMD] were selected. The fully digitalized rehabilitation method with advanced software was used for rehabilitation. For each subject, Optical impressions, CBCT scan, and Digital recording of jaw movement data. Guided implant surgery and digitalized prosthetic rehabilitation; were performed. The effectiveness of the digitalized workflow was assessed by evaluating the changes in the joint symptoms before and after the end of the treatment, changes in the electromyographic tracings, the precision of the prosthetic artefact, assessed through the amount of chair adjustment operating time and the number of retouching/ modifications to be carried out before the completion of the work. The results showed that the mean operative time required in 12 patients was 9.42 min, significantly less than the time recorded in previous studies when the medium mean was 16.00 min. The mean number of touch-ups [adjustments] was less than 3, most of which were on the interproximal surfaces. There were no significant changes recorded in the electromyography tracings. There were also no changes in joint symptoms. It was found that this way of working was entirely reliable and significantly reduced operating times and the number of appointments. Digital flow is beneficial ei dysfunctional patients, not about improvements in temporomandibular symptoms but in times of operability and prosthetic retouching.

Congenital cranio-facial abnormalities in paediatric population: a systematic review on temporomandibular disorders.

The aim of this systematic review was to explore the prevalence of temporomandibular disorders (TMD) in patients affected by congenital craniofacial disorders (CCD). Out of 292 papers, 9 studies were included with 561 participants. The included studies analyzed at least 15 patients treated for temporomandibular disorders, evaluating at least one clinical outcomes such as orofacial pain and/or muscular diseases, malocclusion, skeletal abnormality and/or deformities concerning temporomandibular joint, upper/lower jaw bone malformations. These findings provide an evidence of an association between temporomandibular disorders and congenital craniofacial disorders. The evidence is supported by the findings of a small number of papers in the literature, some of which were of just fair quality. To be definitive in this regard, additional research with a sizable sample size and control group are required.

Assessment of dental arch forms in a sample of children.

In this study, we investigated dental arch forms in a representative sample of children with mixed dentition. Twenty-four pairs of study models, belonging to twenty-four youngsters (twelve boys and twelve girls aged 8 to 9 years) with acceptable occlusion, were scanned and assessed by Ortho analyzer software. Three transversal and three vertical measurements were acquired to evaluate the lengths and widths of dental arches, and the ratios between these measurements were standardized. Next, the mean standardized parameters were used to define the dental arch form. Unpaired t-tests were used to analyze gender differences for all measures. Subsequently, frequencies and percentages were determined for each arch shape in both jaws and genders, and Pearson's Chi-squared test was used to evaluate differences between genders. Males exhibited higher mean values for all measurements, but without statistical significance. The most prevalent dental arch was the mid form (83.3%) for both jaws and genders.

The Cytotoxic Effect of Thermoplastic Denture Base Resins: A Systematic Review.

Partial or complete dentures are constructed from thermoplastic resins that are thermally processed and molded. This review examines the presently available evidence for the cytotoxicity of thermoplasticized denture base resins on human gingival epithelial cells, adipose cells, and fibroblasts; human amnion fibroblasts; and mouse fibroblasts. Electronic searches were performed on PubMed, Scopus, Web of Science, and Google Scholar databases to identify relevant articles to be included in the review until September 2022. Clinical, in vivo, and in vitro studies in English language were searched for. The quality of the studies was assessed using the Toxicological data Reliability Assessment tool (ToxRTool) developed by the European Commission's Joint Research Centre. GRADE assessment was used to evaluate the certainty of evidence. Seven in vitro studies were included in the review. The overall risk of bias was determined to be high, with the majority of studies assessed found to be reliable with restrictions or not reliable. Only two studies were considered reliable without restrictions based on ToxRTool assessment. The effect of thermoplastic denture base resins on viability and cell adherence of human gingival or amnion fibroblasts and mouse fibroblasts (L929s) is not significant. Conditioned media from unpolished specimens of resins were significantly more toxic to cultured cells than those from polished specimens. This may be of concern in cases of poor post-processing of dentures. Based on the limited evidence available, there is low-certainty evidence that thermoplastic denture base resins appear to be biocompatible and show insignificant cytotoxicity. Further well-designed trials adhering to standard reporting guidelines and using objective measures are necessary before outlining universal guidelines for best practice. Long-term in vivo and clinical assessment is necessary to corroborate laboratory findings with clinical outcomes. Denture base resins are in constant contact with oral tissues, and cytotoxic components released by the resins may irritate or inflame the tissues or provoke an allergic response.

Prevalence of temporomandibular disorders (TMD) in bleeding disorders: A systematic review with meta-analysis.

BACKGROUND: Haemophilia A, B and von Willebrand disease are the most common bleeding disorders. There is an increased tendency of spontaneous bleeding into joints resulting in intra-articular infection. It is believed that Temporomandibular Joint (TMJ) can be affected in a similar manner which can further lead to limited mouth opening and ankylosis. The association between bleeding disorders (BD) and development of temporomandibular disorders (TMD) is poorly understood. This systematic review intends to evaluate the association of TMD in individuals with inherited bleeding disorders as compared to healthy controls. METHODS: PubMed, Ovid SP and Google Scholar were searched for articles published between the times of inception to 1 May 2023. All the articles were subjected to Population, Exposure, Comparison and Outcome model (PECO) based on which inclusion and exclusion criteria were applied. Participants (P) is children, adults or adolescents; Exposure (E) is children, adults or adolescents with a diagnosis of Haemophilia or bleeding disorder (BD); Comparator (C) is age and gender-matched healthy controls who do not have Haemophilia or bleeding disorder; Outcome (O) is prevalence of any signs or symptoms (clinical, radiographic) that is suggestive of temporomandibular disorder (TMD). Studies showing the prevalence of TMD are included for qualitative analysis. Only the studies which provided data of the prevalence of TMD in both the groups (BD and healthy controls) were included in the quantitative analysis. TMD diagnosis can be by clinical signs and symptoms, radiographic criteria, Diagnostic Criteria for Temporomandibular Disorders (DC/TMD), The Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) or any other imaging criteria (MRI). We have set the exclusion criteria as articles without a control group, diagnostic sensitivity studies, case reports and systematic reviews and narrative reviews. The software Review Manager version 5.4 (Cochrane Collaboration) was used to perform the pooled analysis. We measured the risk ratio (RR) between the two groups (BD and healthy controls) for the outcome TMD. RESULTS: A total of seven studies are included for qualitative analysis of data. The age of the population (BD and control) in the included studies ranged between 2 and 57 years. The prevalence of TMD in individual studies varied from 2% to 77%, and controls in the individual studies varied from 2% to 14%. Among the included studies, only clinical signs, symptoms and history were taken into consideration in four studies. Four studies were included for meta-analysis, the pooled result of the four studies suggests there is no significant difference in the prevalence of TMD in BD and control group (p value = .11, RR 2.19; 95% CI [0.84, 5.73]). CONCLUSION: This systematic review and meta-analysis elicits no association between bleeding disorders and increased prevalence of TMD.